Modular Token Box

Modular token box with clear acrylic lid. Can be built in multiple configurations making 1, 2 or 3 token wells.

You will have to build this product yourself. It is incredibly easy and will take about 5 minutes (per box) and only requires PVA/Wood glue (although we recommend the use of masking tape to help things bond).

This is a listing for 1 token storage box. 

DIMENSIONS / SPEC
W 70mm  x L 110mm x H 32.5mm
3mm black MDF
2mm clear acrylic lid

THINGS YOU ABSOLUTELY NEED TO BUILD THESE BOXES

•   Good quality PVA or strong wood glue (we use Titebond II), ideally with a thin 2-3mm dispenser tip, a bit like a ketchup bottle or similar.
•   A flat surface and a mat or something to protect your table (PVA Glue is water soluble and can be removed with a bit of elbow grease and a damp cloth but better to not get it everywhere in the first place as my wife keeps telling me!).
•   About 5 minutes building time per box + few hours drying time.
•   Some patience :)

THINGS THAT WILL MAKE LIFE A BIT EASIER

•   Masking tape.
•   A paint brush to level out glue (large brush is good, around 8mm width is what I use, or you can use your fingers).
•   A pot of water to clean your brush.
•   Kitchen towel or cloth to wipe up excess glue, soak excess water from your brush and clean up mess.

Any questions, just ask!